Gas Fitting in Ballina, NSW

We work across Ballina and the Northern Rivers. The service areas page lists twelve places, from Ballina, Lennox Head and Skennars Head on the coast to Alstonville and Wollongbar on the plateau, Byron Bay and Bangalow to the north, and Lismore, Mullumbimby, Brunswick Heads and Ocean Shores. If your town is not on the list, ask anyway, because the list is where the work lands most often rather than a boundary.

Both. Most calls are houses and units, and the commercial work runs from cafes and shops to offices and holiday accommodation. The pipes and drains behave the same way, but a business usually needs the work planned around trading, so tell us when the doors open.

Pipe repairs, burst pipes, leak detection, blocked drains and drain cleaning, toilet repairs, tap and fixture installation, hot water systems, sewer repairs and replacement, gas fitting and commercial plumbing. Each one has its own page with what is included and how the job runs.

Call, or send the enquiry form on the contact page. Say what is leaking, blocked or not working, where it is, and attach a photo of the fitting or the meter box if you can. We tell you what we found and what it will take before any work starts.

Yes. We can handle the plumbing and gas rough-in and the fit-out for a renovation, and we work around the builder, the tiler and the other trades so the pipes are in before the walls are closed up and the fittings go on after the finishes.

Turn the water off at the isolating valve or the meter. Switch off the hot water unit, and if water has reached a power point or the switchboard, leave the power alone and stay clear. Open a tap to drain the line and call us with what you can see.

We start with the water meter. With every tap off and nothing running, a meter that is still turning means water is going somewhere. From there we work along the line, isolating sections and pressure testing, until the leak is narrowed to one spot before anything is opened up.

When a plunger will not shift it, we use a high-pressure water jetter to scour the line and a CCTV drain camera to see what is causing the blockage. Roots, grease, wipes and a collapsed section all look different on camera, and seeing it first means we fix the real cause.

Not always. A blockage is often cleared without any digging, and the camera shows where a damaged line actually is. When digging is the only way to reach a failed pipe, we tell you where and how much before we start.

Usually the inlet valve or the float in the cistern is not shutting off, or the flush seal is letting water seep into the pan. It wastes water all day and often cures itself for a week and then returns. A repair is usually a matter of replacing the worn part.

Do not touch light switches or use a flame. Open doors and windows, shut the gas off at the cylinder valve or meter if you can reach it safely, and get everyone outside. If the smell is strong or anyone feels unwell, call 000 from outside. Once it is safe, call us to find the source.

Cooktops, ovens, heaters and gas hot water units. We connect the appliance, check the gas line and the connections for leaks, and make sure it has the clearance and ventilation it needs before we hand it back.

Yes. We handle electric, gas and solar hot water systems, repairs as well as replacements. We look at your household's water use and the space you have, and tell you whether the system needs repairing or has reached the end of its life.

Rusty water from the hot tap, a tank that leaks from the body rather than a fitting, a relief valve that never stops dripping, or a unit that keeps running out of hot water are the usual signs. A leaking fitting or a failed part can often be repaired, so it is worth having it looked at before you decide.

Yes. Drains, grease build-up and fixture faults are the usual problems in food businesses, and we can plan the work around your trading. Tell us when the kitchen is quiet and what the problem is when you call.